We engineer, manufacture and market BS4504 / BS 10 Flange and high nickel alloys.
We manufacture & export world-class performance BS4504 / BS 10 Flange
-
Manufacturer of BS4504 / BS 10 Flange
BS4504 / BS 10 Flange like Weld Neck Flange, Threaded Flange, Slip-On Flange, Lap Joint Flange, Socket Weld Flange, & Blind Flange produced in our Mumbai factory, carries a promise of quality and consistency. Metal-Tech Engineers continues to meet customers’ needs through global quality standards from original design to distribution. Metal-Tech Engineers manufactures to global standards. We are one of the leading importer, stockholder, suppliers & exporters dealing in BS4504 / BS 10 Flange since 1990. When procuring raw materials to manufacture BS4504 / BS 10 Flange, our primary responsibility is to ensure that same quality and consistency exists in our supply base.
Metal Tech is excellently equipped for the production of tailor-made, high-grade flanges. In our forging shop, an advanced, automatically controlled steel bar furnace with a length of over 12 m heats the raw material up to approx. 1,100°C before rings or flanges with an outside diameter of up to 2,800 mm are formed using our face plate bending machine.
BS4504 / BS 10 Flange Specification
Stainless Steel BS4504 / BS 10 Flange | Carbon Steel BS4504 / BS 10 Flange | Nickel Alloys BS4504 / BS 10 Flange
Click on below for size:-
Group of standards for structural and constructional steels
| B.S. 29 | 1976 | Carbon steel forgings |
| B.S. 970 Part 1 | 1991 | Carbon and carbon manganese steel, free cutting steel |
| B.S. 970 Part 2 | 1983 | Alloy steels |
| B.S. 970-Part 2 | 1988 | Spring steel |
| B.S. 970 Part 3 | 1991 | Bright bars |
| B.S. 1407 | 1970 | Silver steel |
| B.S. 1429 | 1980 | Wire for springs |
| B.S. 1449 | 1991 | Plate, sheet and strip |
| B.S. 1501 Part 2 | 1988 | Plates for pressure vessels |
| B.S. 1501 Part 3 | 1990 | Plates sheet and strips for pressure vessels |
| B.S. 1502 | 1982 | Sections and bars for pressure vessels |
| B.S. 1503 | 1989 | Forgings for pressure vessels |
| B.S. 1504 | 1976 | Castings for pressure purposes |
| B.S. 1506 | 1990 | Bolting material |
| B.S. 1717 | 1983 | Tubes |
| B.S. 2056 | 1991 | Wire for springs |
| B.S. 2772 Part 2 | 1989 | Colliery haulage and winding equipment |
| B.S. 2901 Part 1 | 1983 | Filler rods and wires for gas-shielded arc welding |
| B.S. 2901 Part 2 | 1990 | Filler rods and wires |
| B.S. 3059 Part 1 | 1987 | Boiler and super heater tubes |
| B.S. 3059 Part 2 | 1990 | Boiler and super heater tubes |
| B.S. 3073 | 1977 | Strip |
| B.S. 3074 | 1989 | Seamless tubes |
| B.S. 3075 | 1976 | Wire |
| B.S. 3076 | 1989 | Bars |
| B.S. 3072 | 1989 | Sheet and plate |
| B.S. 3146 Part 2 | 1975 | Investment castings |
| B.S. 3605 Part 1 | 1991 | Seamless tubes and pipes |
| B.S. 3605 Part 2 | 1992 | Welded tubes and pipes |
| B.S. 3606 | 1992 | Tubes for heat exchangers |
| B.S. 6323 Part 1 | 1982 | Seamless and welded tubes |
| B.S. 3100 | 1991 | Steel castings |
| B.S. 3111 Part 1 | 1987 | Wire |
| B.S. 3146 Part 1 | 1974 | Investments castings |
| B.S. 3601 | 1987 | Pipes and tubes |
| B.S. 3602 Part 1 | 1987 | Seamless, ERW and induction welded tubes |
| B.S. 3602 Part 2 | 1991 | Submerged arc welded tubes |
| B.S. 3603 | 1991 | Tubes for pressure purposes (at low temperatures) |
| B.S. 3604 Part 1 | 1990 | Tubes for pressure purposes (at elevated temperatures) |
| B.S. 3604 Part 2 | 1991 | Tubes for pressure purposes (at elevated temperatures) |
| B.S. 4360 | 1990 | Plates, strip, sections, bars |
| B.S. 4670 | 1971 | Alloy steel forgings |
| B.S. 5216 | 1991 | Carbon steel wire for springs |
| B.S. 6323 Part 1 | 1982 | Seamless and welded tubes |
| B.S. EN 10025 | 1994 | Non alloy steels |
| B.S. EN 10028-2 | 1992 | Flat products for pressure purpose (elevated temperatures) |
| B.S. EN 10028-3 | 1992 | Flat products for pressure purpose (weldable fine grain steels, normalized) |
| B.S. EN 10028-4 | 1993 | Flat products for pressure purpose (nickel alloyed, low-temperature properties) |
| B.S. EN 10083-1 | 1991 | Heat-treatable steels |
| B.S. EN 10083-2 | 1991 | Heat-treatable steels |
| B.S. EN 10113-2 | 1993 | Weldable fine grained steels |
| B.S. EN 10113-3 | 1993 | Weldable fine grained steels |
| B.S. EN 10130 | 1991 | Cold rolled flat products for cold forming |
| B.S. EN 10155 | 1993 | Steels with improved atmospheric resistance |
| Group of standards for tool steels | ||
|---|---|---|
| B.S. 4659 | 1989 | Carbon tool steel |
| Group of standards for stainless, heat resisting and valve steels | ||
|---|---|---|
| B.S. 970 Part 1 | 1991 | Wrought steel |
| B.S. 970 Part 4 | 1970 | Valve steels |
| B.S. 1554 | 1990 | Wire |
| B.S. 2901 Part 5 | 1990 | Nickel and nickel alloy filler rods and wires |
| B.S. 3059 Part 2 | 1990 | Boiler and super heater tubes |
| B.S. 3071 | 1986 | Nickel-copper alloy castings |
BS4504 / BS 10 Flange Packaging
Package details: wooden case, pallet or according to customer's requirement
We export to:
Exporter & Suppliers of BS4504 / BS 10 Flange in Dubai, Saudi Arabia, Qatar, West Africa, Russia, Kuwait etc.
BS4504 / BS 10 Flange Availability
| Size (In Inch) | Availability |
|---|---|
BS 10 ½" |
 |
BS 10 ¾" |
|
BS 10 1" |
|
BS 10 1 ¼" |
|
BS 10 1 ½" |
|
BS 10 2" |
|
BS 10 2 ½" |
|
BS 10 3" |
|
BS 10 3 ½" |
|
BS 10 4" |
|
BS 10 5" |
|
BS 10 6" |
|
BS 10 8" |
|
BS 10 10" |
|
BS 10 12" |
|
BS 10 14" |
|
BS 10 16" |
|
BS 10 18" |
|
BS 10 20" |
|
BS 10 24" |
|
Other sizes can be made available on request.
BS 10 Flanges
Products
- Flange
Type of Flanges
ASME/ANSI Flanges
BS 10 Flanges
BS4504 PLATE FLANGE
BS4504 WELD NECK FLANGE
BS4504 THREADED FLANGE
BS4504 BLIND FLANGE
BS4504 SLIP ON FLANGE
BS10 TABLE D FLANGE
BS10 TABLE E FLANGE
BS10 TABLE F FLANGE
BS10 TABLE H FLANGE
BS STANDARDS STEEL
DIN Flanges
EN 1092-1 Flanges
JIS Flanges - Buttweld Fittings
- Forged Fitting-Thread Fittings
- Forged Fitting-Socket weld Fittings
AN ISO 9001:2008 Certified Company