stainless steel eccentric reducer

• 

  Carbon Steel Section -

  • Elbow 90° long radius
  • Elbow 45°
  • Elbow 90° short radius
  • Elbow 180° long radius
  • Elbow 180° short radius
  • Tee straight
  • Tee reducing
  • Reducer concentric
  • Reducer eccentric
  • Buttweld-Cross
  • Buttweld Cap
  • Buttweld lateral tee
  • Carbon steel straight cross
  • Carbon steel reducing cross

  Stainless Section -
  

  • Elbow 90° long radius
  • Elbow 45°
  • Elbow 90° short radius
  • Elbow 180° long radius
  • Elbow 180° short radius
  • Tee straight
  • Tee reducing
  • Reducer concentric
  • Reducer eccentric
  • Buttweld-Lap Joint Stub End
  • Lap joint stub end
  • Buttweld-Cross
  • Stainless Steel straight cross
  • Stainless Steel reducing cross

 

stainless steel eccentric reducer is a type of pipe fitting is defined as a part used in a piping system, Welding a fitting to the pipe means it is permanently leakproof. We are a largest pipe fitting manufacturer for all type of industries in India & shipping worldwide. We can manufacture all 3 groups of Fittings such as Buttweld (BW) fittings, Socket Weld (SW) fittings & Threaded (THD) fittings as per ASME B16.11 standards & other International standards. Specialized in 45 degree elbow, 90 degree elbow, 180 degree elbow, concentric reducer, eccentric reducer, straight tee, equal tee, reducing tee, Y tee, cross, lap joint stub end, pipe cap, blind flange, slip-on neck flange, butt-welding neck flange, flat flange. Metal-Tech Engineers continues to meet customers’ needs through global quality standards from original design to distribution. Metal-Tech Engineers manufactures to global standards.

We are one of the leading importer, stockholder, suppliers & exporters dealing in stainless steel eccentric reducer since 1990. When procuring raw materials to manufacture stainless steel eccentric reducer, our primary responsibility is to ensure that same quality and consistency exists in our supply base.

stainless steel eccentric reducer Specification

Stainless Steel stainless steel eccentric reducer | Carbon Steel stainless steel eccentric reducer | Nickel Alloys stainless steel eccentric reducer | Monel stainless steel eccentric reducer | Alloy Steel stainless steel eccentric reducer | Mild Steel stainless steel eccentric reducer

• Fittings Type:
  

  Butt Weld Fittings:
  LR & SR Elbows, Tees, Ecc., and Conc., Reducers & Caps 
  Forged Fittings:
  Socket Weld, Threaded fittings, Pipe nipple and Swage nipple and Butt welding outlets

• Standards:
  

  ASME B16.9, ASME B16.28, and ASME B16.25
  ASME B16.11, and MSS-SP 97
  ANSI B16.9 / 16.28, ASTM A53/A106, API 5L, ASME B36.10M---1996, DIN2605 / 2615 / 2616, JIS P2311/2312

• Material and Grades: 
  

  Carbon Steel:
  ASTM A234 Gr. WPB
  ASTM A420 Gr. WPL6
  ASTM A105
  ASTM A350 Gr. LF2 
  Stainless Steel:
  ASTM A403 WP316/316L
  ASTM A403 WP304/304L
  ASTM A182 F316L, 304L

• Available Sizes:
  

  Butt Weld Fittings: ½’’ to 102’’
  Forged Fittings: 1/8’’ to 4’’
  Outlets: Up to 36’’
  Thickness: SGP, STD, SCH40, SCH80, SCH160. XS,XXS and so on.

  Other grades or sizes may be available upon request.

 

 

Product name: stainless steel eccentric reducer
Item: buttweld-Reducer
Details:

Nominal Diameter		Outside Diameter		End to End
		D1*D2
DN	NPS	Series A	Serices B	H
20×15	3/4×1/2	26.9×21.3	25×18	38
20×10	3/4×3/8	26.9×17.3	25×14	38
25×20	1×3/4	33.7×26.9	32×25	51
25×15	1×1/2	33.7×21.3	32×18	51
32×25	1.1/4×1	42.4×33.7	38×32	51
32×20	1.1/4×3/4	42.4×26.9	38×25	51
32×15	1.1/4×1/2	42.4×21.3	38×18	51
40×32	1.1/2×1.1/4	48.3×42.4	45×38	64
40×25	1.1/2×1	48.3×33.7	45×32	64
40×20	1.1/2×3/4	48.3×26.9	45×25	64
40×15	1.1/2×1/2	48.3×21.3	45×18	64
50×40	2×1.1/2	60.3×48.3	57×45	76
50×32	2×1.1/4	60.3×42.4	57×38	76
50×25	2×1	60.3×33.7	57×32	76
50×20	2×3/4	60.3×26.9	57×25	76
65×50	2.1/2×2	73.0×60.3	76×57	89
65×40	2.1/2×1.1/2	73.0×48.3	76×45	89
65×32	2.1/2×1.1/4	73.0×42.4	76×38	89
65×25	2.1/2×1	73.0×33.7	76×32	89
80×65	3×2.1/2	88.9×73.0	89×76	89
80×50	3×2	88.9×60.3	89×57	89
80×40	3×1.1/2	88.9×48.3	89×45	89
80×32	3×1.1/4	88.9×42.4	89×38	89
90×80	3.1/2×3	101.6×88.9	-	102
90×65	3.1/2×2.1/2	101.6×73.0	-	102
90×50	3.1/2×2	101.6×60.3	-	102
90×40	3.1/2×1.1/2	101.6×48.3	-	102
90×32	3.1/2×1.1/4	101.6×42.4	-	102
100×90	4×3.1/2	114.3×101.6	-	102
100×80	4×3	114.3×88.9	108×89	102
100×65	4×2.1/2	114.3×73.0	108×76	102
100×50	4×2	114.3×60.3	108×57	102
100×40	4×1.1/2	114.3×48.3	108×45	102
125×100	5×4	141.3×114.3	133×108	127
125×90	5×3.1/2	141.3×101.6	-	127
125×80	5×3	141.3×88.9	133×89	127
125×65	5×2.1/2	141.3×73.0	133×76	127
125×50	5×2	141.3×60.3	133×57	127
150×125	6×5	168.3×141.3	159×133	140
150×100	6×5	168.3×114.3	159×108	140
150×90	6×3.1/2	168.3×101.6	-	140
150×80	6×3	168.3×88.9	159×89	140
150×65	6×2.1/2	168.3×73.0	159×76	140
200×150	8×6	219.1×168.3	219×159	152
200×125	8×5	219.1×141.3	219×133	152
200×100	8×4	219.1×114.3	219×108	152
200×90	8×3.1/2	219.1×101.6	-	152
250×200	10×8	273.0×219.1	273×219	178
250×150	10×6	273.0×168.3	273×159	178
250×125	10×5	273.0×141.3	273×133	178
250×100	10×4	273.0×114.3	273×108	178
300×250	12×10	323.9×273.1	325×273	203
300×200	12×8	323.9×219.1	325×219	203
300×150	12×6	323.9×168.3	325×159	203
300×125	12×5	323.9×141.3	325×133	203
350×300	14×12	355.6×323.9	377×325	330
350×250	14×10	355.6×273.0	377×273	330
350×200	14×8	355.6×219.1	377×219	330
350×150	14×6	355.6×168.3	377×159	330
400×350	16×14	406.4×355.6	426×377	356
400×300	16×12	406.4×323.9	426×325	356
400×250	16×10	406.4×273.0	426×273	356
400×200	16×8	406.4×219.1	426×219	356
450×400	18×16	457×406.4	478×426	381
450×350	18×14	457×355.6	478×377	381
450×300	18×12	457×323.9	478×325	381
450×250	18×10	457×273.0	478×273	381
500×450	20×18	508×457	529×478	508
500×400	20×16	508×406.4	529×426	508
500×350	20×14	508×355.6	529×377	508
500×300	20×12	508×323.9	529×325	508
550×500	22×20	559×508	-	508
550×450	22×18	559×457	-	508
550×400	22×16	559×406.4	-	508
550×350	22×14	559×355.6	-	508
600×550	24×22	610×559	-	508
600×500	24×20	610×508	630×529	508
600×450	24×18	610×457	630×478	508
600×400	24×22	610×406.4	630×426	508
650×600	26×24	660×610	-	610
650×550	26×22	660×559	-	610
650×500	26×20	660×508	-	610
650×450	26×18	660×457	-	610
700×650	28×26	711×660	-	610
700×600	28×24	711×610	720×630	610
700×550	28×22	711×559	-	610
700×500	28×20	711×508	720×530	610
750×700	30×28	762×711	-	610
750×650	30×26	762×660	-	610
750×600	30×24	762×610	-	610
750×550	30×22	762×559	-	610
800×750	32×30	813×762	-	610
800×700	32×28	813×711	820×720	610
800×650	32×26	813×660	-	610
800×600	32×24	813×610	820×630	610
850×800	34×32	864×813	-	610
850×750	34×30	864×762	-	610
850×700	34×28	864×711	-	610
850×650	34×26	864×660	-	610
900×850	36×34	914×864	-	610
900×800	36×32	914×813	920×820	610
900×750	36×30	914×762	-	610
900×700	36×28	914×711	920×720	610
950×900	38×36	965×914	-	610
950×850	38×34	965×864	-	610
950×800	38×32	965×813	-	610
950×750	38×30	965×762	-	610
1000×950	40×38	1016×965	-	610
1000×900	40×36	1016×914	1020×920	610
1000×850	40×34	1016×864	-	610
1000×800	40×32	1016×813	1020×820	610
1050×1000	42×40	1067×1016	-	610
1050×950	42×38	1067×965	-	610
1050×900	42×36	1067×914	-	610
1050×850	42×34	1067×864	-	610
1100×1050	44×42	1118×1067	-	610
1100×1000	44×40	1118×1016	1120×1020	610
1100×950	44×38	1118×965	-	610
1100×900	44×36	1118×914	1220×920	610
1150×1100	46×44	1168×1118	-	711
1150×1050	46×42	1168×1067	-	711
1150×1000	46×40	1168×1016	-	711
1150×950	46×38	1168×965	-	711
1200×1150	48×46	1220×1168	-	711
1200×1100	48×44	1220×1118	1220×1120	711
1200×1050	48×42	1220×1067	-	711
1200×1000	48×40	1220×1016	1220×1020	711

 

Package details: Each order is packaged according to the customer’s standards including preparation for export such as wooden case, pallet or according to customer's requirement

All shipping documentation is provided for seamless delivery from mill to customer.

We export to:

stainless steel eccentric reducer exporter, manufacturer & suppliers in Dubai, Saudi Arabia, Qatar, West Africa, Russia, Kuwait etc.

Material	Fittings	Flanges
Carbon Steel	A234 Gr WPA	A105
	A234 Gr WPB	A105
	A234 Gr WPC	A105
Carbon Steel Alloy High-Temp	A234 Gr WP1	A182 Gr F1
	A234 Gr WP11	A182 Gr F11
	A234 Gr WP12	A182 Gr F12
	A234 Gr WP22	A182 Gr F22
	A234 Gr WP5	A182 Gr F5
	A234 Gr WP9	A182 Gr F9
Carbon Steel Alloy Low-Temp	A420 Gr WPL6	A350 Gr LF2
	A420 Gr WPL3	A350 Gr LF3
Austenitic Stainless Steel	A403 Gr WP304	A182 Gr F304
	A403 Gr WP316	A182 Gr F316
	A403 Gr WP321	A182 Gr F321
	A403 Gr WP347	A182 Gr F347

Fittings

• A234 = This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction.
• A420 = Standard specification for piping fittings of wrought carbon steel and alloy steel for low-temperature service.
• A403 = Standard specification for wrought austenitic stainless steel piping fittings.

Flanges

• A105 = This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, Valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.
• A182 = This specification covers forged or rolled alloy and stainless steel pipe flanges, forged fittings, and Valves and parts for high-temperature service.
• A350 = This specification covers several grades of carbon and low alloy steel forged or ring-rolled flanges, forged fittings and Valves for low-temperature service.